Return; Disposal; Software History; Contact Addresses Of Endress+Hauser - Endress+Hauser Levelflex M FMP40 Operating Instructions Manual

Levelflex M FMP40 with HART/4...20 mA
Date Software version
02.2008 01.08.00
Endress+Hauser
9.5

Return

The following procedures must be carried out before a transmitter is sent to Endress+Hauser e.g.
for repair or calibration:
• Remove all residue which may be present. Pay special attention to the grooves for seals and
crevices which could contain fluid residues. This is particularly important if the substance is
hazardous to health, e.g. flammable, toxic, caustic, carcinogenic, etc.
• Always enclose a duly completed "Declaration of Contamination" form (a copy of the
"Declaration of Contamination" is included at the end of these Operating Instructions). Only then
can Endress +Hauser transport, examine and repair a returned device.
• Enclose special handling instructions if necessary, for example a safety data sheet as per
EN 91/155/EEC.
Additionally specify:
• The chemical and physical properties of the fluid
• A description of the application
• A description of the error that occurred (specify error code if possible)
• Operating duration of the device
9.6

Disposal

In case of disposal please separate the different components according to their material consistence.
9.7

Software history

Software modifications
Original-Software.
Bedienbar über:
– FieldCare
– HART-Communicator 375 mit Rev. 1, DD 1.
9.8

Contact addresses of Endress+Hauser

Contact addresses can be found on our homepage: www.endress.com/worldwide. If you have any
questions, please do not hesitate to contact your Endress+Hauser representative.
Documentation Description of
Instrument Functions
BA366F/00/en/01.08
71060890
BA363F/00/en/03.08
71060231
BA363F/00/en/03.09
71074941
Troubleshooting
73