Commissioning
!
58
6.7
Basic Setup with the Endress+Hauser operating
program
To carry out the basic setup with the operating program, proceed as follows:
• Start the operating program and establish a connection.
• Select the "basic setup" function group in the navigation window.
The following display appears on the screen:
Basic Setup step 1/3:
• Measuring point
• With the button
you move to the next screen display.
Note!
Each parameter that is changed must be confirmed with the RETURN key!
Levelflex M FMP40 with HART/4...20 mA
L00-fmp-Ixxx-20-00-00-de-035
Endress+Hauser