Table of Contents
Advertisement
Memobase Plus CYZ71D
2.4
Operational safety
‣
Before commissioning the entire measuring point, make sure all the connections are correct.
Ensure that the electrical cables and hose connections are not damaged.
‣
Do not operate damaged products, and safeguard them to ensure that they are not operated
inadvertently. Mark the damaged product as defective.
‣
If faults cannot be rectified, the products must be taken out of service and secured against
unintentional commissioning.
2.5
Product safety
The product is designed to meet state-of-the-art safety requirements, has been tested and left
the factory in a condition in which it is safe to operate.
Relevant regulations and European standards have been observed.
2.6
Return
The product must be returned if repairs or a factory calibration are required, or if the wrong
product has been ordered or delivered. According to legal regulations Endress+Hauser, as an
ISO-certified company, is required to follow certain procedures when handling returned
products that are in contact with the medium.
To ensure the safe, professional and swift return of your product, please
refer to the applicable procedures and basic conditions on our website:
www.services.endress.com/return-material
Endress+Hauser
Basic safety instructions
7
Advertisement
Chapters
Table of Contents
