Endress+Hauser Levelflex M FMP40 Operating Instructions Manual page 57

Levelflex M FMP40 with HART/4...20 mA
⇒
ENDRESS + HAUSER
–
+ E
Endress+Hauser
Move mode
F
Then press to get to the Move mode.
You now have the following options:
O
• moves the curve to the right.
S
• moves the curve to the left.
Vertical Zoom mode
F
Press again to get to the Vertical Zoom mode.
You now have the following options:
O
• increases the vertical scale.
S
• reduces the vertical scale.
The display symbol indicates the zoom mode that is currently active (
Ending the navigation
F
• By pressing repeatedly, you change cyclically between the different modes of the envelope
curve navigation system.
O S
• By pressing and simultaneously, you leave the navigation. The zoom and shift settings
configured are retained. The Levelflex does not use the standard display until you activate the
"Recording Curve" function (0E2) again.
⇓
or is displayed.
S O
is displayed.
S O
After 3 s, the following message appears
Commissioning
L00-FMP4xIxx-07-00-00-xx-002
to ).
L00-FMP4xIxx-07-00-00-xx-003
57