Scope Of Delivery; Certificates And Approvals; Registered Trademarks - Endress+Hauser Levelflex M FMP40 Operating Instructions Manual

Identification
"
!
12
2.2

Scope of delivery

Caution!
Please observe the instructions on unpacking, transporting and storing measuring devices given in
the "Incoming acceptance, transport, storage" Section → ä 14!
The scope of delivery consists of:
• Assembled device
• Endress+Hauser operating program (on the enclosed CD-ROM)
• Accessories (see Section 8).
Accompanying documentation:
• Brief Operating Instructions (basic setup/troubleshooting): housed in the device
• Operating Instructions (this manual)
• Approval documentation: if this is not included in the Operating Instructions.
Note!
Operating Instructions BA366F - "Description of Device Functions" can be found on the enclosed
CD-ROM.
2.3

Certificates and approvals

CE mark, Declaration of Conformity
The device is designed to meet state-of-the-art safety requirements, has been tested and left the
factory in a condition in which it is safe to operate. The device complies with the applicable
standards and regulations as listed in the EC Declaration of Conformity and thus complies with the
statutory requirements of the EC directives. Endress+Hauser confirms the successful testing of the
device by affixing to it the CE mark.
2.4

Registered trademarks

® ®
KALREZ , VITON , TEFLON
Registered trademark of E.I. Du Pont de Nemours & Co., Wilmington, USA
®
TRI-CLAMP
Registered trademark of Ladish & Co., Inc., Kenosha, USA
®
HART
Registered trademark of the HART Communication Foundation, Austin, USA
®
PulseMaster
Registered trademark of Endress+Hauser GmbH+Co. KG, Maulburg, Germany
Levelflex M FMP40 with HART/4...20 mA
®
Endress+Hauser