Table of Contents
Advertisement
Konfort Series 700R Service Manual
4.5.7 "SECONDARY SENSORS" calibration on Konfort 760R, 760R
Bus and 780R BiGas
The Secondary sensors function in the Sensor calibration menu allows
user to calibrate the auxiliary pressure sensors of the equipment, if
installed. Refer, for further information, to the VDC device installation
manual.
4.6
"PRIVATE PARAMETERS" function on Konfort 700R units
The Private parameters function, available from the Service menu,
allows user to check the value of some reserved functional parameters of
the equipment.
The following subparagraphs will report the default values for the private
parameters of each model of Konfort 700R unit. The changing of each
parameter will be possible by simply editing the new value and by
confirming with the ENTER button.
WARNING! The private parameters change implies a modification
of the behavior of the unit. Please, contact TEXA Technical
Assistance for being instructed in any parameter change.
4.6.1 List of the private parameters for Konfort 705R
MAX ABSOLUTE WEIGHT MAIN TANK
MAX ABSOLUTE WEIGHT SECOND TANK
OTHER OILS
CLEANING TIME
FIRST RECOVERY TIME
USED OIL PHASE
RECOVERY CLEANING TIME
HOSES CLEANING TIME
VACUUM TIME FOR FLUXING
MINIMUM WEIGHT FOR FLUXING
AUTOCALIBRATION THRESHOLD (10 pt.)
ON TIME LP PRESSURE CHARGING PHASE (0.1 sec.)
RECOVERY PHASE WAITING TIME
RECOVERY PHASE FINAL TIME
CHECK WAITING TIME
IO/UV DELAY TIME (0.01 sec.)
REFR. IDENTIFIER CALIBRATION THRESHOLD T(h)
MAX FAILED DRAIN RETRIES
Table 4.1 – List of the private parameters for Konfort 705R
Copyright © 2014 – TEXA S.p.A.
PARAMETER
85
TEXA Technical Assistance
DEFAULT
VALUE
gr. 25000
gr. 0
sec. 10
sec. 30
sec. 40
sec. 90
sec. 75
min. 5
Kg. 5
sec. 20
sec. 20
sec. 2
3
15
5
30
0
4
Advertisement
Table of Contents
