Vacuum Pump Oil Replacement - TEXA Konfort 700R Series Manual

Konfort Series 700R Service Manual
The unit will perform a small refrigerant filling into its own internal
hydraulic circuit, in order to check the possible presence of leakages
related to the filter replacement. In this situation, the display of the
unit will show the following message:
Image 5.12 – Request to close the back compartment of the unit
At the end of this leak check, the counter related to the filter
replacement will be automatically reset and the maintenance will
be completed.
5.2.

Vacuum Pump Oil Replacement

The vacuum pump oil replacement has to be performed when it will be
automatically requested by the unit (i.e., once the pump will reach 90
hours of functioning):
Image 5.13 – Request to replace the vacuum pump oil
Copyright © 2014 – TEXA S.p.A.
TEXA Technical Assistance
110