General Safety - TEXA Konfort 700R Series Manual

Hide thumbs Also See for Konfort 700R Series:
Table of Contents

Advertisement

Konfort Series 700R Service Manual

GENERAL SAFETY

Konfort
700R
personnel, who must demonstrate to have a basic knowledge of the
principles of refrigeration, of the operation of refrigeration systems,
of the physical properties of refrigerants and of the potential dangers
which equipments under high pressure could cause.
Konfort 700R series units are equipped with the following safety
devices:
-
Safety pressure switch: it stops the compressor when action
pressure (19 Bars) has been reached.
-
Safety valve: it is fully open if the action value (20 Bars) is
reached.
-
Power supply line fuses: they allow the interruption of the power
supply in case of overload by any device.
Any type of tampering of the above mentioned safety devices is
strictly
forbidden.
damages
to
alterations, even partial, performed on the equipment.
The Konfort 700R series equipments are designed and constructed
to treat exclusively with the refrigerant R134a or with refrigerant
R1234yf. Their use is not approved with any other kind of gas.
-
The coolant fluid removed from an A/C system must be handled
with extreme caution, in order to avoid any possible refrigerant
output to the open air.
-
The tanks used for storing refrigerants must be dedicated each to
a particular cooling fluid, in order to avoid any possible mixing
between R134a and R1234yf. For any further information about
the precautions to adopt, refer to the safety sheets released by
the refrigerant fluid manufacturers.
-
The tanks must be clean and clearly marked, in order to identify
the type of refrigerant inside them.
-
It is absolutely forbidden to use external tanks or other storage
containers without homologation and not equipped with safety
valves.
It's mandatory to guard the equipments during their operation.
It's mandatory to wear suitable protective clothes, like glasses and
gloves. The refrigerant liquids could cause physical injuries (i.e.
blindness). Due to their low boiling temperature (about -30 °C), the
contact with the skin may cause cold burns to the operator.
Avoid the inhalation of refrigerants' vapors.
Copyright © 2014 – TEXA S.p.A.
series
equipments
TEXA
S.p.A.
people
or
things
2
TEXA Technical Assistance
are
intended
declines
any
produced
by
not
for
qualified
liability
for
approved

Advertisement

Table of Contents
loading

Table of Contents