Uv Additive" Calibration On Konfort 760R, 760R Bus And 780R Bigas - TEXA Konfort 700R Series Manual

Konfort Series 700R Service Manual TEXA Technical Assistance
followed, after few seconds, by the message here below:
Image 4.78 – Confirmation message of the correctness of the calibration
thus certifying the correctness of calibration of the drained oil the load
cell.
4.5.4 "UV ADDITIVE" calibration on Konfort 760R, 760R Bus and
780R BiGas
The UV Additive function, available in the Sensor calibration menu,
allows user to calibrate the auxiliary load cell for the UV injection on the
equipment.
Refer to the procedure reported on Paragraph 4.5.3 for the calibration of
the auxiliary load cell for the drained oil. When requested, place the
appropriate sample weight to the UV injection plug on the back of the
unit:
Image 4.79 – Connection of the 400-grams sample
weight to the plug of the UV injection
80
Copyright © 2014 – TEXA S.p.A.