The Recovered Oil Is Not Discharged Into The Drain Bottle - TEXA Konfort 700R Series Manual

Konfort Series 700R Service Manual

7.11 The recovered oil is not discharged into the DRAIN bottle

Ensure that the silicone tube that connects the EVSO electro-valve,
located on the output of the main separator filter, to the oil drain
connector will not be disconnected or obstructed:
Check that the quick connectors of the oil drain bottle will not be
obstructed (in the case of Konfort 760R, 760R Bus and 780R BiGas
units refer again to Image 7.30 as example):
Image 7.41 – Checking of the quick connector on the oil drain
Try, from the Power outputs menu, to manually activate the EVSO
oil drain solenoid valve, in order to verify its functionality.
Copyright © 2014 – TEXA S.p.A.
Image 7.40 – Silicone tube for the oil drain
properly connected to its junction
(See red circle)
bottle of a Konfort 705R, 710R or 720R
150
TEXA Technical Assistance