Table of Contents
Advertisement
Konfort Series 700R Service Manual
TEXA Technical Assistance
CHAPTER 5 – ORDINARY MAINTENANCE
This chapter will describe the main operations needed for performing the
ordinary maintenance on a Konfort series 700R unit.
Basically, the ordinary maintenance consists in the periodical replacement
of the main filter and of the oil of the vacuum pump of the unit.
The unit will automatically inform the user about the need of these
maintenance operations, by means of proper messages which will be
shown on the display every time the usage limits set by the firmware of
the unit will be overcome.
5.1.
Main Filter Replacement
The main filter replacement has to be performed when it will be
automatically requested by the unit. The Konfort unit will start to
advice about the imminent need to replace the main filter once the 80%
of its total consumption will be reached:
Image 5.1 – Warning message about the
imminent exhaustion of the main filter
104
Copyright © 2014 – TEXA S.p.A.
Advertisement
Table of Contents
