Column Refrigeration Service Manual
7.3.1 Replace Wine Lighting (cont.)
STEP 2
Using small flat screwdriver pry out light covering each led light board on cabinet side walls (Upper covers
have a cut-out at the top of each opening, lower covers have cut-out at the bottom of each opening).
Be careful while removing cover, do not scratch
liners.
STEP 3
Light boards are adhesive backed, so using a flat blade screwdriver, start at one end of board and pry the
board of the light housing. Gradually work your way from one end to the other to remove completely.
Return to
Table of Contents
CAUTION
Figure 7-2.2. Pry Light Covering
Figures 7-2.3. Pry Light Housing Board
67