Table of Contents
Advertisement
8.15 Drawer Compartment Dividers
To remove the drawer compartment dividers
(insulated dividers between each drawer):
1. Locate the two retaining pins on the left and
right sides approximately 2/3 back on the
divider extrusions.
2. Remove the two retaining pins by prying up
using a flat blade screwdriver (protect material
surfaces to avoid scratches) and then pulling
the pins out.
3. Pull forward on the divider and disconnect the
light electrical connection.
4. Pull the divider out of the cabinet.
To install:
1. Slide divider into cabinet extrusion
2. Make light electrical connection
3. Manage excess wire and slide divider in until
completely inserted.
4. Install the two retaining pins.
102
Column Refrigeration Service Manual
Figure 8-16 - Drawer Compartment Divider
And Retaining Pin
Return to
Table of Contents
Advertisement
Table of Contents
Troubleshooting
