18” shallow-depth series beverage center/48” signature series refrigerator / wine reserve stacked on a 48” signature series freezer / refrigerator drawers (12 pages)
We dedicate considerable time to ensure that our products provide the highest level of customer satisfaction. We thank Niche/Product Dimensions you for selecting Perlick products for your home and assure you of our continuing interest in your satisfaction. Electrical Anti-tip Bracket...
Please review the following safety precautions and read all Please take note of the following safety precautions prior to instructions prior to product installation. After the completion moving, unpacking and installing your Perlick column. of installation, keep these instructions in a safe place for future DANGER...
OPENING DIMENSIONS - SINGLE UNIT connecting the unit. Failure to do so can affect the function and performance of the appliance. The depth of each Perlick column is 24” (610). Allow for panel thickness when planning the finished opening depth. A CAUTION This appliance should be installed in dry, minimum of a 4”...
PERLICK RESIDENTIAL COLUMN REFRIGERATION INSTALLATION INSTRUCTIONS ELECTRICAL / ANTI-TIP BRACKET / PRODUCT PLACEMENT ELECTRICAL ANTI-TIP BRACKET DANGER WARNING Serious electrocultion hazard. Electrical To prevent the unit from tipping forward, grounding is required. This appliance is equipped with a the anti-tip bracket must be installed. Use all anti-tip bracket 3-prong (grounding) polarizing plug for your protection against hardware as instructed.
PERLICK RESIDENTIAL COLUMN REFRIGERATION INSTALLATION INSTRUCTIONS LEVELING / ALIGNMENT When the unit is properly leveled, door adjustments are less LEVELING/ALIGNMENT likely to be needed. Move the unit near the opening. Plug the power cord into the WARNING grounded outlet and roll the unit into position. Push unit into To reduce the possibility of the unit tipping place.
Page 8
PERLICK RESIDENTIAL COLUMN REFRIGERATION INSTALLATION INSTRUCTIONS ANTI-TIP BRACKET INSTALLATION FOR INTEGRATED INSTALLATION NOTE: Do not fasten anti-tip brackets to adjacent cabinetry until the cabinet has been leveled. 8 | perlick.com/residential...
Page 9
PERLICK RESIDENTIAL COLUMN REFRIGERATION INSTALLATION INSTRUCTIONS ANTI-TIP BRACKET INSTALLATION FOR FREESTANDING INSTALLATION NOTE: Cabinet must be leveled before securing to wall with anti-tip bracket. perlick customer service (800)558-5592 | 9...
3/4” (19). Always allow for panel thickness when planning the finished opening depth. Stainless steel panels come pre-drilled for a Perlick handle. Please note that the Perlick Pro Handle is included with the purchase of a stainless steel panel. CUSTOM OVERLAY DOOR PANEL Perlick columns come ready to accept customer-supplied door panel and handle hardware.
PERLICK RESIDENTIAL COLUMN REFRIGERATION INSTALLATION INSTRUCTIONS INSTALLING DOOR OVERLAY PANELS DOOR PANEL INSTALLATION DOOR OVERLAY PANEL ADJUSTMENT Typical panel dimensions are based on 84” (2134) finished Close the door to make adjustments to align panels and reveals. height with 1/8” (3) reveals. Template must be adjusted for For up and down adjustments, turn the height adjustment panels exceeding typical dimensions.
Page 17
PERLICK RESIDENTIAL COLUMN REFRIGERATION INSTALLATION INSTRUCTIONS TOP OF DOOR ILLUSTRATION perlick customer service (800)558-5592 | 17...
PERLICK RESIDENTIAL COLUMN REFRIGERATION INSTALLATION INSTRUCTIONS DOOR TRIM INSTALLATION DOOR TRIM INSTALLATION Once overlay is adjusted, mount the door trim bracket onto the door adjustment bracket using the provided screws. 18 | perlick.com/residential...
PERLICK RESIDENTIAL COLUMN REFRIGERATION INSTALLATION INSTRUCTIONS INSTALLING FILTERS CARBON AIR FILTERS ETHYLENE FILTERS Carbon air filters should be placed in the holder in the Ethylene filters should be placed in the holder in top of the tip- perforated panel located in the top-rear of the cabinet (A).
Need help?
Do you have a question about the CR24 and is the answer not in the manual?
Questions and answers