Figure 8-17.1. & 8-17.2. Remove Wine Shelves; Figure 8-17.3. & 8-17.4. Install Wine Shelves - Perlick CR30R Series Service Manual

Column Refrigeration Service Manual
8.16 Shelving
8.16.1 Wine Shelving
The wine reserves use soft-close full extension
slides. Never force the slide all the way closed
as this can cause damage to the soft-close
mechanism.
Removal
To remove the wine shelves, pull on the shelf
and fully extend. Locate the release mechanism
on each slide and pull forward on the release
mechanisms and pull the shelf out. To remove
the slide member from the cabinet pilaster, simply
lift-up evenly and pull forward. Support the slide to
avoid scratching the side wall of the cabinet.
Figure 8-17.1. Remove Wine Shelves
Figure 8-17.2. Remove Wine Shelves
Return to Table of Contents
Reinstallation
To reinstall the shelves, first install the cabinet
slide assemblies into the pilasters, next, line up
the shelf slide members with the cabinet slide
members, slide together gently, ensuring that the
shelf slide member is parallel with the cabinet slide
member. Do not force together as this can result
in damage to the ball bearing retainer and result
in ball bearings dislodging from the retainer. Once
engaged, push the shelf in until shelf slide is fully
retracted, then pull the shelf out to full extension
to ensure the slide lock mechanism is engaged.
Finally, push the shelf in until the soft-close
mechanism engages and fully retracts the shelf
into position.
Figure 8-17.3. Install Wine Shelves
Figure 8-17.4. Install Wine Shelves
103