Table 3.3. Doors,Drawers,Shelving Diagnostics/Troubleshooting - Perlick CR30R Series Service Manual

Column Refrigeration Service Manual
3.3 Doors, Drawers, Shelving
PROBLEM
Hinge Problems
Door Handle Loose
Overlay Loose
Condensation On
Glass Doors
Key Won't Come Out
Of Lock
Push To Open Drawers
Tip-out Bin Operation
Shelving
Slides Noisy
Return to Table of Contents
CAUSE
Improper Door Mounting
Hinges not activated
Excessive wear
Improper Handle Mounting
Excessive wear
Improper Overlay Installation
Excessive wear
High ambient temperatures, high
humidity environmental conditions
Frequent Door Openings
Key not in proper position
Excessive wear
Wrong Orientation
Drawers won't open
Drawers won't close
Slides have disengaged from bin
Slides/Stops misaligned
Full Extension Shelves disengage
Lack of lubricant
Debris in slides

Table 3.3. Doors,Drawers,Shelving Diagnostics/Troubleshooting

SOLUTION
Verify proper mounting.
Activate Hinges
Replace Worn Parts
Verify proper mounting.
Replace Worn Parts
Verify proper installation
Replace Worn Parts
Refer to Refrigeration System Repairs-
Ambient Temperatures
Refer to Door, Drawers and Shelving
Rotate key to the proper position
and remove
Replace Worn Parts
Verify orientation
Verify push to open mechanisms
work properly
Verify proper slide engagement
Re-engage the bin and troubleshoot
Align Slides and spring steel stops
Verify proper slide engagement
Lubricate slide with food grade lubricant
Clean and remove debris
19