Figure 6-15.1. Remove Cotter Pins; Figure 6-15.2. Lift And Rotate Compressor - Perlick CR30R Series Service Manual

6.9 Replace Inverter
Disconnect power to the unit before working on
product to avoid electrocution hazard.
STEP 1
Remove Refrigeration Module from cabinet by following instructions in
STEP 2
Remove the four retaining cotter pins and washers from the tabs that secure the compressor to the base.
STEP 3
Carefully lift the compressor up so the rubber feet clear the tabs and rotate the compressor slightly to
access the inverter mounting screw.
54
WARNING

Figure 6-15.1. Remove Cotter Pins

Figure 6-15.2. Lift And Rotate Compressor

Column Refrigeration Service Manual
Section 6.6.
Return to Table of Contents