Table of Contents
Advertisement
Column Refrigeration Service Manual
6.7
Replace Condenser Fan Motor
Following the instructions for replacing the
refrigeration module, remove the module from
the cabinet. Using a phillips screwdriver, remove
the fasteners holding the condenser fan motor to
the condenser shroud. Unplug fan from electrical
connection. Install new fan in reverse manor. Re-
install refrigeration module (replace module gasket
if worn or damaged). See Figure 6-13.
6.8
Replace Evaporator Fan Motor
Following the instructions for replacing the
refrigeration module, remove the module from the
cabinet. Using a phillips screwdriver, remove the
fasteners holding the evaporator fan motor to the
fan housing. Using small flat blade screwdriver
disconnect fan leads from terminal block. Install
new fan in reverse manor. Re-install refrigeration
module (replace module gasket if worn or
damaged). See Figure 6-14.1 and 6-14.2.
Return to
Table of Contents
Figure 6-13. Condenser Fan Motor/Fastener
Figure 6-14.1. Evaporator Fan Motor/Fastener
Figure 6-14.2. Evaporator Terminal Block
53
Advertisement
Table of Contents
Troubleshooting
