Figure 6-12.4. Lower Refrigeration Module; Figure 6-12.5. Slide Refrigeration Module Out; Figure 6-12.6. Disconnect Power Cord - Perlick CR30R Series Service Manual

Column Refrigeration Service Manual
6.6 Replace Refrigeration Module (cont.)
STEP 4
Using a 3/8" allen wrench, lower the refrigeration module by loosening (2) socket head cap screws.
STEP 5
Once module is lowered and all wires disconnected, slide module out by pulling on the vase
panel of the module. Protect the floor in front of the unit to prevent scratches to the floor.
STEP 6
Disconnect the power cord from the rear of the unit after the refrigeration module is removed.
Return to Table of Contents
Figure 6-12.4.
Lower
Refrigeration
Module
Figure 6-12.5.
Slide
Refrigeration
Module Out
Figure 6-12.6.
Disconnect
Power Cord
51