Figure 6-15.5. Remove 3-Pin And Ground Connectors; Figure 6-15.6. Install Inverter And Remount Compressor - Perlick CR30R Series Service Manual

6.9 Replace Inverter (cont.)
STEP 6
Remove the three-pin connector and ground connector from the compressor using a small flat head
screwdriver.
STEP 7
Install the new inverter and remount the compressor.
56

Figure 6-15.5. Remove 3-Pin And Ground Connectors

Figure 6-15.6. Install Inverter And Remount Compressor

Column Refrigeration Service Manual
Return to Table of Contents