Figure 8-19. Refrigerator Shelving - Perlick CR30R Series Service Manual

Column Refrigeration Service Manual
8.16.3 Refrigerator Shelving
The wine reserves use soft-close full extension
slides. Never force the slide all the way closed
as this can cause damage to the soft-close
mechanism.
Removal
To remove the wine shelves, pull on the shelf
and fully extend. Locate the release mechanism
on each slide and pull forward on the release
mechanisms and pull the shelf out. To remove
the slide member from the cabinet pilaster, simply
lift-up evenly and pull forward. Support the slide to
avoid scratching the side wall of the cabinet.
Return to Table of Contents
Reinstallation
To reinstall the shelves, first install the cabinet slide
assemblies into the pilasters, next, line up the shelf
slide members with the cabinet slide members,
slide together gently, ensuring that the shelf slide
member is parallel with the cabinet slide member.
Do not force together as this can result in damage to
the ball bearing retainer and result in ball bearings
dislodging from the retainer. Once engaged, push the
shelf in until shelf slide is fully retracted, then pull
the shelf out to full extension to ensure the slide lock
mechanism is engaged. Finally, push the shelf in until
the soft-close mechanism engages and fully retracts
the shelf into position.

Figure 8-19. Refrigerator Shelving

105