Installing The Sfp Transceiver - Planet GS-4210 SERIES User Manual

2.2.3 Installing the SFP transceiver

The sections describe how to insert an SFP transceiver into an SFP slot. The SFP transceivers are hot-pluggable and
hot-swappable. You can plug in and out the transceiver to/from any SFP port without having to power down the Managed Switch,
as the Figure 2-1-7 shows.
 Approved PLANET SFP Transceivers
PLANET Managed Switch supports both single mode and multi-mode SFP transceivers. The following list of approved PLANET
SFP transceivers is correct at the time of publication:
Gigabit SFP Transceiver Modules
SFP-Port 1000BASE-T Module
 MGB-GT
MGB-SX SFP-Port 1000BASE-SX mini-GBIC module

MGB-LX SFP-Port 1000BASE-LX mini-GBIC module

 MGB-L50 SFP-Port 1000BASE-LX mini-GBIC module – 50km
 MGB-L70 SFP-Port 1000BASE-LX mini-GBIC module – 70km
 MGB-L120 SFP-Port 1000BASE-LX mini-GBIC module – 120km
 MGB-LA10 SFP-Port 1000BASE-LX (WDM,TX:1310nm) – 10km
 MGB-LA20 SFP-Port 1000BASE-LX (WDM,TX:1310nm) – 20km
 MGB-LB20 SFP-Port 1000BASE-LX (WDM,TX:1550nm) – 20km
 MGB-LA40 SFP-Port 1000BASE-LX (WDM,TX:1310nm) – 40km
 MGB-LB40 SFP-Port 1000BASE-LX (WDM,TX:1550nm) – 40km
Fast Ethernet SFP Transceiver Modules
SFP-Port 100BASE-FX Transceiver – 2km
 MFB-FX
Figure 2-1-7 Plug in the SFP transceiver
38
User's Manual of GS-4210 Series