Table of Contents
Advertisement
2.1.2 LED Indications
The front panel LEDs indicates instant status of port links, wireless data activity and system power;
and helps monitor and troubleshoot when needed.
of the Wireless Router.
LED Definition
LED
Status
On
PWR
Off
On
SYS
Flashing
Off
Flashing
WLAN
Off
On
LAN1-4
Flashing
Off
On
WAN
Flashing
Off
Slow Flashing
WPS
On
Quick
Flashing
1.
When a device has been successfully added to the network by WPS function, the
WPS LED will keep on for about 5 minutes and then turn off.
2.
When pressing and holding the WPS/Reset Button for more than 5 seconds, you
will reset the router.
Figure 2-2
Figure 2-2 WNRT-617 Front Panel
Power is on.
Power is off.
The Router is initializing.
The Router is working properly.
The Router has a system error.
The Wireless function is enabled.
The Wireless function is disabled.
A device is linked to the corresponding port but there is no activity.
An active device is linked to the corresponding port.
No device is linked to the corresponding port.
A device is linked to the corresponding port but there is no activity.
An active device is linked to the corresponding port.
No device is linked to the WAN port.
A wireless device is connecting to the network by WPS function. This
process will last for about 2 minutes.
A wireless device has been successfully added to the network by WPS
function. The LED will keep on for about 5 minutes.
A wireless device has failed to be added to the network by WPS
function.
Table 2-1 The LEDs indication
-7-
User's Manual of WNRT-617
and
Table 2-1
show the LED indications
Function
Advertisement
Table of Contents
