Multi-Level Password Protection - Planet G.SHDSL Bridge/Router GRT-402 User Manual

PLANET Technology Corp. GRT-101/401/402 User's Manual
interfaces have on-line help information. To get on-line help, type "?" for CLI mode or press CTRL+Q for menu driven
interface.

3.4.1 Multi-level password protection

When you login via serial console or Telnet, GRT series defaults to a program
execution (read-only) privileges to you. To change the configuration and write
changes to nonvolatile RAM (NVRAM), you must work in enable mode. Follow
the steps below to invoke the enable mode:
admin> enable
Supervisor password: ****
Note: The supervisor password is the same as that for web management interface. If you have not change password
setting for the web interface of GRT series, enter "root" to enter GRT series. For more security issues for remote
management interfaces such as Telnet and web interface, see section 3.15 Management Security.
You are now in enable mode. The system prompt appears:
admin#
Follow the steps below to change the user interface:
To select menu driven interface for user profile 1 (default user profile), enter:
admin# admin user modify 1 attrib menu
The following command select CLI mode for user profile 1:
admin# admin user modify 1 attrib command
To save your changes enter:
admin# write
To enable your changes, reboot the system:
admin# reboot
For the menu interface, there is a method to enable CLI mode temporarily for
script input. By pressing CTRL+U simultaneously, you can see the CLI system
prompt in the command line window:
Command Line Window...
admin#
Press CTRL+U again in the command line window to back to the menu driven
- - 35