Table of Contents
Advertisement
4.5.1
Power over Ethernet Powered Device
3~5 Watts
6~12 Watts
10~12 Watts
3~12 Watts
3~25 Watts
30 Watts
Since the WGR-500 Series per PoE port supports 48~56V DC PoE power output, please check
whether the powered device's (PD) acceptable DC power range is 48~56V DC; otherwise, it will
damage the PD.
User's Manual of WGR-500-4P and WGR-500-4PV
Voice over IP phones
Enterprises can install PoE VoIP phone, ATA and other
Ethernet/non-Ethernet end-devices in the central where UPS is installed for
uninterruptible power system and power control system.
Wireless LAN Access Points
Suitable for museums, sightseeing places, airports, hotels, campuses,
factories, warehouses, etc.
IP Surveillance
PoE Splitter
PoE Splitter splits the PoE 52V DC over the Ethernet cable into 5/12V DC
power output. It frees the device deployment from restrictions due to power
outlet locations, which eliminate the costs for additional AC wiring and
reduces the installation time.
High Power PoE Splitter
High PoE Splitter splits the PoE 526V DC over the Ethernet cable into
24/12V DC power output. It frees the device deployment from restrictions
due to power outlet locations, which eliminate the costs for additional AC
wiring and reduces the installation time.
High Power Speed Dome
This state-of-the-art design is considerable to fit in various network
environments like traffic centers, shopping malls, railway stations,
warehouses, airports, and production facilities for the most demanding
outdoor surveillance applications. An extra power outlet is not required.
79
Great
for
enterprises,
campuses,
hospitals,
banks,
Power outlets are not required.
museums,
etc.
Advertisement
Table of Contents
