Port Configuration; Port Control - Planet FGSW-2620VM User Manual

4.3 Port Configuration

4.3.1 Port Control

In Port control you can configure the settings of each port to control the connection parameters, and the status of each port
is listed beneath.
The page includes the following fields:
Object
Port:
State:
Negotiation:
Speed:
Duplex:
Flow Control:
Figure 4-3-1: Port Control interface
Description
Use the scroll bar and click on the port number to choose the port to be
configured.
Current port state. The port can be set to disable or enable mode. If the port state
is set as 'Disable', it will not receive or transmit any packet.
Auto and Force. Being set as Auto, the speed and duplex mode are negotiated
automatically. When you set it as Force, you have to set the speed and duplex
mode manually.
It is available for selecting when the Negotiation column is set as Force. When
the Negotiation column is set as Auto, this column is read-only.
It is available for selecting when the Negotiation column is set as Force. When
the Negotiation column is set as Auto, this column is read-only.
Whether or not the receiving node sends feedback to the sending node is
determined by this item. When enabled, once the device exceeds the input data
rate of another device, the receiving device will send a PAUSE frame which halts
the transmission of the sender for a specified period of time. When disabled, the
receiving device will drop the packet if too much to process.
59
User's Manual of FGSW-Series