Table of Contents
Advertisement
Step 22: Attach Ground Stakes to Swing End
A: Drive 1 (0318) Ground Stake 10-1/2" into the ground at each (1749) SW Post on the inside of the assembly
and attach with 2 (S3) #8 x 2-1/2" Wood Screws per ground stake. (fig. 22.1 & 22.2)
must be driven 10-1/2" into ground. Digging or driving stakes can be
dangerous if you do not check first for underground wiring, cables or
gas lines.
Fig. 22.2
1749
10-1/2"
Wood Parts
2 x
Ground Stake 1 1/4 x 1 1/2 x 14"
0318
WARNING:
To prevent tipping and avoid potential injury, stakes
S3
0318
Fig. 22.1
Hardware
4 x
#8 x 2-1/2" Wood Screw
S3
37
Advertisement
Table of Contents
