KidKraft F24145 Installation And Operating Instructions Manual page 26

Step 12: Floor Back Assembly cont.
Hex Bolt Assembly
Lock
Washer
Flat He x
Washer Bolt
C: Attach 2 (0359) Front Dividers to (1762) Floor Back with 1 (H1) 1/4 x 1-1/2" Hex Bolt (with lock washer, flat
washer and t-nut) per board. Be sure to keep bolts loose. (fig. 12.4 & 12.6)
D: Attach each (0359) Front Divider to (1758) Top Back using 1 (PB2) 1/4 x 1-1/4" Pan Bolt (with lock washer, flat
washer and t-nut) per board. Be sure to keep bolts loose. (fig. 12.4 & 12.5)
E: Level and attach (1758) Top Back to both (1771) Posts using 4 (S7) #12 x 2" Pan Screws (with 3/16" flat wash-
ers). (fig. 12.7)
Loosely attach bolts
1771
Fig. 12.7
S7
Wood Parts
1 x Top Back 1 x 4 x 38-1/2"
1758
2 x Front Divider 1 x 4 x 38"
0359
T- Nut
Fig. 12.4
1758
0359
1762
4 x #12 x 2" Pan Screw (with 3/16" flat washer)
S7
2 x 1/4 x 1-1/2" Hex Bolt
H1
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
2 x 1/4 x 1-1/4" Pan Bolt
PB2
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
PB2 x 2
0359
1771
H1
S7
Hardware
26
Fig. 12.5
1758
Hole towards top
0359
Fig. 12.6
1762