Table of Contents
Advertisement
Step 17: Wall Assembly
A: On the Swing Side Wall attach 2 (0304) CE Floor Boards on either side of the (1757) Wall Mount with 4
(S1) #8 x 1 1/8" Wood Screws per board. Make sure the bottom of the boards are 1" up from the (1774) CE
Gap Boards and there is approximately 3" between each (1771) Post and (0304) CE Floor Board, not exceed-
ing 3-1/4". (fig. 17.1 & 17.2)
B: On the opposite wall attach 3 (0304) CE Floor Boards between the 2 (1771) Posts with 4 (S1) #8 x 1-1/8"
Wood Screws per board. Make sure the bottom of the boards are 1" up from the (1774) CE Gap Board and
there is approximately 2-1/2" between each board, not exceeding 2-3/4". (fig. 17.3 & 17.4)
3"
Fig. 17.2
1771
3"
Fig. 17.1
1771
0304
1774
2-1/2"
1771
S1
x 4 per board
S1
0304
Fig. 17.4
Fig. 17.3
1771
1774
1"
Wood Parts
Hardware
5 x
CE Floor Board 1 x 4 x 32-1/2"
20 x
#8 x 1-1/8" Wood Screw
0304
S1
31
Advertisement
Table of Contents
