Chalk Wall Assembl - KidKraft Appleton Play System F24148 Installation And Operating Instructions Manual

Step 13: Chalk Wall Assembly
A: Place the Chalk Wall Tarp in between each (0359) Front Divider and (1758) Top Back. Make sure tarp is
smooth and tight and then attach to (1758) Top Back with 3 (S5) #8 x 1/2" Pan Screws (with #8 flat washer).
Tighten the bolts in both (0359) Front Dividers. (fig. 13.1)
B: Recheck that tarp is smooth and tight and then measure 4" up from the bottom of the tarp on each side and
attach Chalk Wall Tarp to both (0359) Front Dividers from the inside of the assembly with 1 (S5) #8 x 1/2" Pan
Screws (with #8 flat washer) per board. Evenly space and attach with 2 more screws per side. (fig. 13.2)
C: 3" above (1762) Floor Back attach (1754) Lower Back Wall to each (0359) Front Divider with 4 (S1) #8 x 1-1/8"
Wood Screws. (fig. 13.3)
D: Attach Chalk Wall Tarp to (1754) Lower Back Wall with 3 (S5) #8 x 1/2" Pan Screws (with #8 flat washer). (fig.
13.4)
Fig. 13.1
0359
Fig. 13.4
Wood Parts
1 x Lower Back Wall 1 x 4 x 31-1/2"
1754
S5
1758
0359
S5
12 x
S5
4 x
S1
S5
0359
1754
0359
1762
Hardware
#8 x 1/2 Pan Screw (with #8 flat washer)
#8 x 1-1/8 Wood Screw
27
Fig. 13.2
S1
Fig. 13.3
3"
0359
1754
Other Parts
1 x Chalk Wall Tarp
0359
S5
4"