Floor Back Assembly - KidKraft F24145 Installation And Operating Instructions Manual

Step 11: Floor Back Assembly
A: Attach (1762) Floor Back to (1761) Side Joist with 2 (H3) 1/4 x 2-1/2" Bolts (with flat washer, lock washer and
t-nut) and 2 (S7) 12 x 2" Pan Screws (with flat washers) as shown in fig. 11.1. (1761) Side Joist should be flush to
the top of (1762) Floor Back. Bolts to be installed on (1761) Side Joist side and screws installed from (1762) Floor
Back side.
Wood Parts
1 x Side Joist 2 x 2 x 34-3/4"
1761
1 x Floor Back 5/4 x 4 x 38-5/8"
1762
H3
1761
S7
Hardware
2 x #12 x 2 Pan Screw (with 3/16" flat washer)
S7
2 x 1/4 x 2-1/2" Hex Bolt
H3
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
24
Fig. 11.1
H3
1762