Step 1 Of 4: Port Forwarding; Step 3 Of 4: Enable Ddns On The System; Step 4 Of 4: Connect To The System's Ddns Address - FLIR Lorex LNR400 Series Instruction Manual

Table of Contents

Advertisement

18
DDNS Setup (Advanced)
To set up remote connectivity with your system, you must:
1. Port forward the HTTP port (default: 80) and Client port (default: 35000) on your router
to your system's IP address.
2. Create a DDNS account.
3. Enable DDNS on the system.
4. Test the remote connection by entering your DDNS address in the client software.

18.2.1 Step 1 of 4: Port Forwarding

You must port forward the HTTP port (default: 80) and Client port (default: 35000) on your
router to your system's IP address before you can remotely connect to your system. There
are several methods to port forward your router:
• Use the Auto Port Forwarding Wizard (PC only) to port forward the required ports
(see
www.lorextechnology.com
Wizard manual on www.lorextechnology.com.
• Manually port forward the required ports on your router to your system's IP address by
following your router manufacturer's instructions. For more information on port forward-
ing, see the reference guides on www.lorextechnology.com.
NOTE
If the above ports are not forwarded on your router, you will not be able to access your system remotely.

18.2.2 Step 3 of 4: Enable DDNS on the System

To enable DDNS in your System:
1. Right-click and click Main Menu. Enter the system password if prompted.
2. Click
and then click Network>DDNS.
3. Check Enable.
4. Under Domain Name, enter the Domain Name/URL Request your received in the
email after registering for DDNS.
5. Under User Name, enter your DDNS User Name.
6. Under Password, enter your DDNS Device password.
7. Click OK to save your settings.
NOTE
Please allow 10~15 minutes for the DDNS servers to update with your new DDNS address before at-
tempting to connect.

18.2.3 Step 4 of 4: Connect to the System's DDNS Address

NOTE
Please allow 10~15 minutes for the DDNS servers to update with your new DDNS address before at-
tempting to connect.
To connect using the system's DDNS address:
#LX400021; r.29578/29578; en-US
for details). For instructions, see the Auto Port Forward
151

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lorex lnr400sLorex lnr4163sLorex lnb3163b

Table of Contents