Step 3 Of 4: Enable Ddns On The System; Step 4 Of 4: Connect To The System's Ddns Address - FLIR DN4083E64 Instruction Manual

20
DDNS Setup (Advanced)
Domain name/URL Request:
DDNS User Name:
Device DDNS password:

20.2.3 Step 3 of 4: Enable DDNS on the System

To enable DDNS in your System:
1. Right-click and click Main Menu. Enter the system password if prompted.
2. Click and then click Network>DDNS.
3. Check Enable.
4. Under Domain Name, enter the Domain Name/URL Request your received in the
email after registering for DDNS.
5. Under User Name, enter your DDNS User Name.
6. Under Password, enter your DDNS Device password.
7. Click OK to save your settings.
NOTE
Please allow 10~15 minutes for the DDNS servers to update with your new DDNS address before
attempting to connect.

20.2.4 Step 4 of 4: Connect to the System's DDNS Address

NOTE
Please allow 10~15 minutes for the DDNS servers to update with your new DDNS address before at-
tempting to connect.
To connect using the system's DDNS address:
1. Download and install the client software on a remote computer.
• PC Users: Download and install the Client Software for PC from
com/pro.
• Mac Users: Download and install the Client Software for Mac from
www.flirsecurity.com/pro. Double click to extract the software. Drag the software to
Applications.
2. Once installation is finished, double-click the FLIR Cloud™ Client icon (
desktop.
#LX400022; r.16694/30364; en-US
www.flirsecurity.
) from the
144