Step 7: Verify Camera Image; Step 8: Set The Time; Default System Password & Port Numbers; Remote Connectivity - FLIR Lorex LHV2000FS Series Instruction Manual

Table of Contents

Advertisement

5
Basic Setup (LHV2000 Series)
2. Enter the system user name (default: admin) and password (default: 000000) and
click OK. Wait for the firmware update to complete. The system will restart once the
firmware has been upgraded.
WARNING
DO NOT POWER OFF THE SYSTEM OR DISCONNECT THE POWER CABLE DURING FIRM-
WARE INSTALLATION

5.7 Step 7: Verify Camera Image

• Power on the cameras, and then verify the camera video quality before mounting the
cameras to a permanent location.
• Mount the cameras under a sheltered location. Always verify the outdoor rating of your
camera before installing it in a permanent location.

5.8 Step 8: Set the Time

• Set the system time and date for accurate video time stamps. Videos with inaccurate
times may not be valid as surveillance evidence.
• For details on setting the system time, see 9 Setting The Time, page 25.
5.9 Default System Password & Port Numbers
CAUTION
By default, the system user name is admin and the password is 000000. It is essential that you create
your own password. For details, see 13 Managing Passwords and User Accounts, page 42.
The system requires a user name and password to log in to the system remotely using a
computer or mobile device. After logging on remotely the first time, you will be asked to
create a custom password for the system.
Local system and remote connectivity (LAN & Internet) user name and password:
• Username: admin
• Password: 000000
Default ports for DDNS remote access:
• Port 80 (HTTP port)
• Port 35000 (Client port)

5.9.1 Remote Connectivity

This system features remote connectivity, allowing you to view security video from any-
where in the world using our exclusive apps for smartphones, tablets and computers. Our
cloud service allows you to connect to your system over the Internet via a secure hand-
shake with our servers. This means you can easily connect to your system without requir-
ing any network configuration.
For details on setting up your system to connect to the Internet:
• See 15 Connecting to Your System Over the Internet on PC or Mac, page 78.
OR
• See 17 Connecting to your System Using Smartphone or Tablet Apps, page 109.
Connectivity using Lorex's free DDNS service is also available, but requires the ports listed
above to be port forwarded on your router.
#LX400060; r.36893/36903; en-US
11

Advertisement

Table of Contents
loading

Table of Contents