Step 7: Verify Camera Image; Step 8: Set The Time; Default System Password & Port Numbers; Flir Cloud - FLIR M3160 Instruction Manual

6 Basic Setup (M3100 Series)

6.7 Step 7: Verify Camera Image

• Power on the cameras, and then verify the camera video quality before mounting the
cameras to a permanent location.
• Mount the cameras under a sheltered location. Always verify the outdoor rating of your
camera before installing it in a permanent location.

6.8 Step 8: Set the Time

• Set the system time and date for accurate video time stamps. Videos with inaccurate
times may not be valid as surveillance evidence.
• For details on setting the system time, see 10 Setting The Time, page 21.
6.9 Default System Password & Port Numbers
CAUTION
By default, the system user name is admin and the password is 000000. It is essential that you create
your own password. For details, see 14 Managing Passwords and User Accounts, page 36.
A user name and password is required to log in to the system. After logging on using a
computer or mobile device the first time, you will be asked to create a custom password
for the system.
Local system and remote connectivity (LAN & Internet) user name and password:
• Username: admin
• Password: 000000
Default ports for DDNS remote access:
• Port 80 (HTTP port)
• Port 35000 (Client port)

6.9.1 FLIR Cloud™

This system features the exclusive FLIR Cloud™. This is a cloud service that allows you to
connect to your system over the Internet via a secure handshake with our servers. This
means you can easily connect to your system without requiring any network configuration.
For details on setting up your system to connect to the Internet using FLIR
Cloud™:
• See 16 Connecting to Your System Over the Internet on PC or Mac, page 67.
OR
• See 18 Connecting to your System Using Smartphone or Tablet Apps, page 98.
Connectivity using FLIR's free DDNS service is also available, and requires the ports listed
above to be port forwarded on your router. See 19 DDNS Setup (Advanced), page 141 for
DDNS setup instructions.

6.10 Quick Access to System Information

To quickly open a window that displays vital system information:
• Right-click to open the Quick Menu and click Info. Enter the system user name (default:
admin) and password (default: 000000).
OR
• Press the ENTER button on the front panel.
OR
• Press the ENTER button on the remote control.
#LX400028; r. 1.0/16141/16141; en-US
11