Basic Setup (Dv700Fs Series); Step 1: Connect The Bnc Cameras; Step 2: Connect The Mouse; Step 3: Connect The Ethernet Cable - FLIR Lorex DV700FS Series Instruction Manual

5

Basic Setup (DV700FS Series)

5.1 Step 1: Connect the BNC Cameras

• Connect cameras to the Video Input ports on the rear panel of the DVR.
NOTE
Connect Lorex 1080p MPX, 720p HD, or analog cameras to the system. For a list of compatible cam-
eras, please visit www.lorextechnology.com/support.
Push and twist the BNC connector clockwise to secure it to the BNC port.

5.2 Step 2: Connect the Mouse

• Connect a USB mouse (included) to one of the USB ports.

5.3 Step 3: Connect the Ethernet Cable

• Connect an Ethernet cable (included) to the LAN port on the rear panel of the DVR.
Connect the other end of the Ethernet cable to a router on your network.
#LX400060; r.37992/37992; en-US
8