Pan Tilt Zoom Menu - Bolin Technology D Series Manual

PAN TILT ZOOM Menu

The PAN TILT ZOOM menu is used to select the
pan/tilt/ zoom mode.
DIGITAL ZOOM:
You can set digital zoom to ON or OFF. When set to
OFF, digital zoom does not operate, and only optical
zoom is available. When set to ON, digital zoom takes
over after optical zoom reaches MAX (12X). Up to
200X/300X can be zoomed digitally.
When digital zoom is available, the resolution
decreases
ZOOM RATIO OSD (Zoom times display):
Set Ratio OSD to ON, the number of the zoom ratio
that you are operating displays on screen.
VIDEO PARAMETERS:
Set Video Parameters OSD to ON, the value of the setting and parameter will be displayed on screen when
you use remote controller to adjust the camera image parameters using the direct adjust buttons "+" or "-" with
the feature keys on the remote controller.
AF SEN. (AF SENSITIVITY):
NORMAL: Reaches the highest focus speed quickly. Use this when shooting a subject that moves frequently.
LOW: Improves the stability of the focus. When the lighting level is low, the AF function does not take effect,
even though the brightness varies, contributing to a stable image.
MF SPEED:
Manual Focus variable speed, that has 0-7 eight speed levels.
NEAR LIMIT:
Can be set in a range from OVER, 5m, 3m, 2m, 1,5m, 1.2m, 1.0m, 80cm, 55cm, 35cm, 25cm, 18cm, 14cm,
10cm, 8cm.
ADAPTIVE PT:
Set to ON, Pan Tilt speed would be adaptive with the zoom range.
Turn ON to automatically adjust the Pan and Tilt speed with various zoom ratios. For example, the higher
zoom ratio you use, the slower the speed of P/T.
P/T SPEED:
Set P/T Speed value to from 0 to 5 (The speed from low to high), to change the speed of P/T on remote
controller.
PRESET SPEED:
Set preset speed value from 0 to 5 to change the preset speed.
PAN DIR (PAN DIRECTION):
Camera horizontal left and right orientation setting, options: Normal/Invert
TILT DIR (TILT DIRECTION):
Camera tilt up and down orientation setting, options: Normal/Invert
TALLY MODE
When the tally mode is set to ON, the tally light on the camera will be turned on.
If you connect the camera to Bolin keyboard controller, you can set the GPI I/O to Output or Input mode in
Keyboard Setting, allowing tally control via the keyboard directly.
TRACE MEMORY
Trace Memory is a function used to record pan/tilt/zoom operations
controlled by remote controller or a remote controller, which can be
played back as required. Up to 100 pan/tilt/zoom commands can be
recorded for up to 60 seconds.
•
TRACE NO: Select the TRACE number to record, playback or
delete.
•
PLAY TIMES: How to playback the recorded operations, can
be set to Once or Unlimited.
o
Once: The recorded trace memory will only run one time, then stop.
o
Unlimited: The recorded trace memory will loop unlimited times until leaving Trace Memory
mode or manual PTZ movement is triggered.
•
RECORD: Record operations.
OSD
EXPOSURE
WHITE BALANCE
PICTURE 1
PICTURE 2
→PAN TILT ZOOM
SYSTEM
STATUS
31
PAN TILT ZOOM MENU
DIGITAL ZOOM OFF
ZOOM RATIO OSD 0FF
VIDEO PARAMETERS OFF
AF SEN. NORMAL
MF SPEED 2
NEAR LIMIT 14cm
ADAPTIVE PT ON
P/T SPEED 3
PRESET SPEED 5
PAN DIR NORMAL
TILT DIR NORMAL
TALLY MODE OFF
TRACE MAMORY
AUDIO
Trace Memory
TRACE NO 1
PLAY TIMES ONCE
RECORD
MEMORY PLAY