System Menu - Bolin Technology D Series Manual

SYSTEM MENU

PELCO ID
When using RS485 (PELCO P/D) control, Set
Camera ID to the address that you want to control
to. This value is from 1-255.
IR-RECEIVE (Infrared Signal Reception)
When this is set to OFF, the camera does not
receive the signal from the infrared remote
controller.
Be sure to keep it set to ON when you use the
infrared remote controller.
Note
You cannot set IR-RECEIVE to OFF when you
operate the menu using the infrared remote controller. To set it to OFF, use the appropriate VISCA controller.
PRESET SETTINGS
Used to set functions related to presets, including Preset Memory and Motionless Preset
•
PRESET MEMORY:
o
This feature allows you to save the image parameter
to PRESET memory, turn it on to save most image
parameters like picture, white balance, exposure,
focus mode, zoom positions when you call the
preset.
o
Set to OFF to disable saving the image parameters
to presets, make the preset only include pan/tilt/zoom actions.
•
MOTIONLESS PRESET:
o
When motionless preset is ON, video image will not be shown during the transition to the
designated preset location.
o
Set to OFF to disable Motionless preset, back to normal running preset action.
COLOR SPACE
User can select color space of the camera output signal based on
the color space of the back-end display or video capture device.
•
User can select YUV444/422/420 or RGB format in 2160p
resolution
•
User can select YUV 422 or RGB format in 1080p and 720p
resolution
FACTORY RESET
You can select this item to set camera back to Factory Default
setting by pressing HOME button to confirm the action. All data of
the camera that have been set will be deleted.
RELOAD PRESET 1:
When this item is set to ON, preset 1 is set to HOME position. The camera goes to HOME position when it is
powered on or reset.
VIDEO FORMAT:
This Video Format selection will determine the video format of HDMI output.
You can change the video format here.
•
Select the Video Format row, press "←" button to choose the video format you want to set to, then
press "→"
•
Pressing "→" button changes the value on certain product models. If not, then click HOME button to
confirm the change or can cancel by pressing the MENU button.
•
Note: The camera will reboot by itself. The new video format will be activated.
The video formats that you can select from are:
•
2160P: 60/59.94/50/30/29.97/25/23.98
•
1080P: 60/59.94/50/30/29.97/25/23.98
•
720P: 60/59.94/50
SV: MCU Software Version Number that is currently running on the camera. You may need this information for
technical support.
OSD
EXPOSURE
WHITE BALANCE
PICTURE 1
PICTURE 2
PAN TILT ZOOM
→SYSTEM
STATUS
PRESET SETTINGS
PRESET MEMORY
MOTIONLESS PRESET
COLOR SPACE
COLOR SPACE
VIDEO FORMAT
COLOR SPACE
COLOR SPACE
VIDEO FORMAT
33
SYSTEM MENU
PELCO ID 001
IR-RECEIVE ON
PRESET SETTINGS
COLOR SPACE YUV422
FACTORY RESET
RELOAD PRESET 1 ON
VIDEO FMT 2160p60
SV: VOC260B40040AA008
ON
ON
YUV444/422/420/RGB
2160p60
YUV422/RGB
1080p59.94/720p60