Status Menu; Firmware Upgrade; Upgrading Mcu Firmware; Upgrading Dante Av Firmware - Bolin Technology D Series Manual

STATUS MENU

Status menu will display the basic information of this camera, as well as video parameters. It is convenience
created for users to quickly get the active status of the camera's settings.
OSD
EXPOSURE
WHITE BALANCE
PICTURE 1
PICTURE 2
PAN TILT ZOOM
SYSTEM
→ STATUS

Firmware Upgrade

There are 2 types of upgradable firmware with the camera. The latest camera firmware is available to be
downloaded from Bolin website: www.bolintechnology.com
1. MCU (Micro Control Unit) firmware upgrade via USB
2. DanteAV firmware upgrade via Dante Upgrade Tool
NOTE: The firmware upgrade process is intended to be performed under the supervision of a BOLIN-
Authorized repair technician. For assistance with this, please contact your authorized BOLIN Technology
dealer, installer, or integrator. BOLIN Technology Technical Support can also be reached for assistance with
this process

Upgrading MCU Firmware

MCU Firmware can be upgraded by following these steps:
1. Load the .bin file onto a flash drive (Formatted as
FAT32), and rename the file as "HD20.bin"
2. With the camera powered off, insert the flash drive
to the USB port on the back panel of the camera
3. Apply power to the camera
The green Status indicator light on the front panel of the
camera will turn red for a few seconds while the upgrade
takes place. Once the upgrade is finished, the light will turn
back to green. The camera will proceed through a normal
boot cycle. Check the SV version information on the OSD
boot screen to confirm that the new firmware has been properly installed.

Upgrading Dante AV firmware

You can upgrade camera Dante AV firmware version via Dante Firmware Update Manager.
Connect and configure your camera with your local network successfully, running "Dante Firmware Update
Manager" to do Dante AV firmware upgrades.
For instructions on how to Firmware upgrade for Dante AV, please refer to User Manual Part Two.
SYSTEM MENU
>NEXT PAGE
PELCO ID 1
VISCA ID 1
IR ID 1
BAUD RATE 9600
COMM TYPE 422
FORMAT 2160p60
SV VOC260B40040AA008
OSD
EXPOSURE
WHITE BALANCE
PICTURE 1
PICTURE 2
PAN TILT ZOOM
SYSTEM
→ STATUS
34
SYSTEM MENU
>NEXT PAGE
EXP MODE AUTO_EXP
WB MODE AUTO
COLOR 5
HUE 8
FLIP OFF
MIRROR OFF
ND FILTER OFF
STABILIZER OFF
P/T SPEED 3
PRESET SPEED 5