Table of Contents
Advertisement
Perform the following operations:
1. Place an image of white subject (For example: A piece of white paper) in the center of the screen.
2. Press the HOME button of the infrared remote controller.
The one-push white balance adjustment is activated.
ATW (Auto Tracing White Balance): Auto Tracing White balance (2000K to 10000K)
USER: This is a mode that enables you to manually set the control of R and B gain up to 256 steps.
NOTE: When you select USER, R. GAIN (red gain) and B. GAIN (blue gain) appear. You can select each item
in the range from 0 to 255.
OUTDOOR AUTO: This is an auto white balance mode specifically for outdoors. It allows you to capture
images with natural white balance in the morning and evening.
SODIUM VAPOR LAMP (AUTO/OUTDOOR AUTO): This is an auto white balance mode specifically for
outdoors, which is compatible with sodium vapor lamps.
• SL AUTO: Sodium Vapor Lamp Auto: This is an auto white balance mode that is compatible with sodium
vapor lamps.
• SL: Sodium Vapor Lamp: This is a fixed white balance mode specifically for sodium vapor lamps.
• SLO AUTO: Sodium Vapor Lamp Outdoor Auto: This is an auto white balance mode specifically for
outdoors, which is compatible with sodium vapor lamps.
PICTURE Menu
The PICTURE menu is used to set the items related to the picture.
SHARPNESS:
Picture sharpness value ranges from 0 to 15. You can enjoy emphasized edge and
high-resolution images.
EFFECT: (Picture Effect)
It consists of the following functions:
Image effect from Off, B&W
NOISE REDUCTION:
Noise reduction - you can enjoy clearer images by removing unnecessary noise.
You can select 6 levels from OFF (MIN), 1 to 5 (MAX).
FLIP:
Image E-Flipper – Used when ceiling mounting or upright mounting. Set to OFF
is upright mode, set to ON is for ceiling mount.
MIRROR:
You can turn it ON to display the video reversely.
DE-FLICKER:
You can turn it ON if the Video output format frame rate is difference from your country's electricity Frequency.
GAMMA:
In this mode, the gamma can be set to value from 0 to 1.
WDR: (Wide dynamic range mode): WDR feature is available on certain product models.
Wide Dynamic: ON, OFF. The camera distinguishes light and dark areas within the same scene, adjusts the
brightness for dark areas, and also controls the blown out highlights.
You can select the wide dynamic range mode between ON and OFF
COLOR
You can configure the color gain from 1-15. Use this setting when bright color is particularly important.
HUE
You can adjust color phase from 1-15.
STABILIZER
When the image stabilizer function is set to ON, you can obtain the image with less screen blur caused by shaking. The
correction effect can be achieved at the vibration frequency around 10 Hz. The image stabilizer function uses the digital
zoom method. Although there are changes in the angle of view and resolution, the sensitivity is maintained.
PAN TILT ZOOM Menu
The PAN TILT ZOOM menu is used to select the pan/tilt/ zoom mode.
DIGITAL ZOOM: OFF, ON, SRZ
23
Advertisement
Table of Contents
