Table of Contents
Advertisement
GAMMA
You can choose the type of basic curve for GAMMA
correction.
PATTERN: You can choose a gamma curve from 512
patterns stored in the camera. You can specify the
pattern out of 512 patterns using PATTERN and
PATTERN FINE. PATTERN defines the upper two
digits of the pattern, and PATTERN FINE defines the
last digit.
PATTERN: Choose a value from 0 to 51. This can be
chosen When SELECT is PATTERN.
PATTERN FINE: Choose a value from 0 to 9. When
PATTERN is 0, 0 cannot be chosen for PATTERN FINE. When PATTERN is 51, a value larger than 2 cannot
be chosen for PATTERN FINE. This can be chosen when SELECT is PATTERN.
OFFSET: You can choose the offset of the output level of gamma curves. Choose a value from –64 to 0 to +64.
LEVEL: Gamma level, you can choose a level value from -7 to 0 to +7.
VISIBILITY ENHANCER (VE)
Depending on the imaging scene, the Visibility Enhancer function makes the darker part of a camera image
brighter, and automatically correct brightness and contrast to show bright parts clearly.
PAN TILT ZOOM Menu
The PAN TILT ZOOM menu is used to select the pan/tilt/ zoom mode.
DIGITAL ZOOM:
Set to DIGITAL ZOOM ON, 12X digital zoom is
activated.
You can set digital zoom to ON or OFF. When set to OFF,
digital zoom does not operate, and only optical zoom is
available. When set to ON, digital zoom takes over after
optical zoom reaches MAX (20X/30X). Up to 200X/300X
can be zoomed digitally.
When digital zoom is available, the resolution decreases
ZOOM RATIO OSD (Zoom times display):
Set Ratio OSD to ON, the number of the zoom ratio that
you are operating displays on screen.
AUTO SEN:
NORMAL: Reaches the highest focus speed quickly. Use this when shooting a subject that moves frequently.
LOW: Improves the stability of the focus. When the lighting level is low, the AF function does not take effect, even
though the brightness varies, contributing to a stable image.
MF SPEED:
Manual Focus variable speed, that has eight speed levels.
NEAR LIMIT:
Can be set in a range from OVER, 1cm, 11cm, 30cm, 80cm, 1.2m, 1.4m, 1.6m, 2.0m, 2.5m, 3.1m, 4.2m, 6m, 10m, 20m.
ADAPTIVE P/T:
Set to ON, Pan Tilt speed would be adaptive with the zoom range.
Turn ON to automatically adjust the Pan and Tilt speed with various zoom ratios. For example, the higher
zoom ratio you use, the slower the speed of P/T.
P/T SPEED:
Set P/T Speed value to from 0 to 5 (The speed from low to high), to change the speed of P/T on remote controller.
PRESET SPEED:
Set preset speed value from 0 to 5 to change the preset speed.
PAN DIR:
Camera horizontal Left and right orientation setting, option: Normal/Invert
TILT DIR:
Camera tilt up and down orientation setting, option: Normal/Invert
OSD
EXPOSURE
WHITE BALANCE
>PICTURE1
PICTURE2
>GAMMA
PAN TILT ZOOM
>SYSTEM
OSD
EXPOSURE
WHITE BALANCE
>PICTURE 1
PICTURE 2
GAMMA
>PAN TILT ZOOM
>SYSTEM
44
GAMMA MENU
GAMMA
0
PATTERN
51
PATTERN FINE
2
OFFSET
0
LEVEL
0
VISIBILITY ENHANCER
OFF
PAN TILT ZOOM MENU
DIGITAL ZOOM
OFF
ZOOM RATIO OSD
0FF
AUTO SEN
LOW
MF SPEED
2
NEAR LIMIT
30cm
ADAPTIVE PT
ON
P/T SPEED
3
PRESET SPEED
5
PAN DIR
NORMAL
TILT DIR
NORMAL
Advertisement
Table of Contents
