Important Information - Bolin Technology D Series Manual

IMPORTANT INFORMATION

Legal Notice
Attention:
To ensure account security, please change the password after your first login. You are recommended to set a
strong password (no less than eight characters). Password login does not apply to some models that do not
need password login.
The contents of this document are subject to change without prior notice. Updates will be added to the new
version of this manual. We will readily improve or update the products or procedures described in the manual.
Best effort has been made to verify the integrity and correctness of the contents in this document, but no statement,
information, or recommendation in this manual shall constitute formal guarantee of any kind, expressed or implied.
We shall not be held responsible for any technical or typographical errors in this manual.
The product appearance shown in this manual is for reference only and may be different from the actual
appearance of your device.
This manual is a guide for multiple product models and so it is not intended for any specific product.
In this manual, the illustrations of displayed interface, parameters displayed, drawings and value ranges may vary
with models. Please see the actual product for details.
Due to uncertainties such as physical environment, discrepancy may exist between the actual values and reference
values provided in this manual.
Use of this document and the subsequent results shall be entirely on the user's own responsibility.
Symbols
Symbol
WARNING!
CAUTION!
NOTE!
Safety Information
WARNING!
Installation and removal of the unit and its accessories must be carried out by qualified personnel. You must
read all the Safety Instructions supplied with your equipment before installation and operation.
Warnings:
•
If the product does not work properly, please contact your dealer. Never attempt to disassemble the camera
yourself. (We will not assume any responsibility for problems caused by unauthorized repair or
maintenance.)
•
This installation should be made by a qualified service person and should conform to all the local codes.
•
When shipping, the camera should be packed in its original packaging.
•
Make sure the power supply voltage is correct before using the camera.
•
Do not drop the camera or subject it to physical shock.
Contains important safety instructions and indicates situations that may cause bodily injury.
User must be careful and improper operations may cause damage or malfunction of product.
Indicates useful or supplemental information about the use of product.
Description
5