Erasing The Measurement Data Storage; Measurement Dataset; Storage Locations - Xylem SL Analytics Lab 865 Operating Manual

Data storage
Quitting the display
50
To quit the display of stored measurement datasets, you have the following
options:
 Switch directly to the measured value display with <M>.
 Quit the display and move to the next higher menu level with <F1>/[Back].

8.3.2 Erasing the measurement data storage

Erasing the measurement data storage (see section 8.3.1 E
MEASURED VALUE STORAGE

8.3.3 Measurement dataset

A complete dataset consists of:
 ID number
 Date/time
 Measured value of the connected sensor
 Measured temperature value of the connected sensor or manually set tem-
perature
 AutoRead info: The AR indicator appears with the measured value if the
AutoRead criterion was met while storing (stable measured value). Other-
wise, there is no AR indicator.
 Calibration evaluation: +++, ++, +, -, or no evaluation

8.3.4 Storage locations

The Lab 865 meter has two measurement data storages. The measured values
recorded either manually or automatic are stored separately in individual
measurement data storages.
Storage
Manual data storage
Automatic data storage
, page 48).
Maximum number of datasets
500
5000
Lab 865
DITING THE
ba77145e02 12/2017