Optex CVS2 Instruction Manual page 57

Function name
Setting range
LCD display
(Initial value)
Bank selection
BANK
Auxiliary output
AUX OUT
Ramco Innovations
Sets the method to switch the bank No.
0-14 : Selects the set bank. (Bank 2 switch
input is an external teaching input.)
0 – 16
15 : Switches the bank by an external input.
(Bank 2 switch input is an external
(16)
teaching input.)
16 : Switches the bank by an external input.
(Bank switch 2 also can be used.)
Sets the method to output the auxiliary output.
0 : Effective output
Turns OFF by the bank switch and turns ON
by the first judgment output after bank switch.
Turns OFF after the first imaging is complete
after powered ON.
1 : Judgment timing output
Every time judgment is done, output repeats
ON / OFF alternately.
0 – 4
2 : Lighting output
(4)
Used to turn ON lighting other than
CVS-LW1. Turns ON output for the time
lighting is necessary.
3 : Inside correction tolerance output
Turns ON only when all the tolerances of
the position & magnification correction and
rotation correction are within their set values.
4 : Always ON
Always turns ON the auxiliary output.
www.optex-ramco.com
CHANGING SET VALUE
Explanation
phone 800-280-6933
5
57