Initializing Set Value - Optex CVS2 Instruction Manual

4
Press for 3 seconds or more.
The set value change screen is displayed.
5
Change the set value by pressing
and
.
: Value increments by "1".
: Value decrements by "1".
6
Press for 3 seconds or more.
The set value is entered and the set value
reference screen is restored. Pressing
restore the set value reference screen, canceling
the revision to the set value.
7
Press .
The standard screen is restored.

Initializing Set Value

Initializing Set Value
1
Change the value of the set item
INITIALIZ
2
Turn OFF the power supply
temporarily and turn it ON again with
and
The right screen is displayed.
Do not turn OFF the power supply until the
device restarts.
Ramco Innovations
to "15".
pressed simultaneously.
www.optex-ramco.com
CHANGING SET VALUE
Set value changes
to red.
will
phone 800-280-6933
5
49