Table of Contents
Advertisement
Function of Color Selection & Mask Edition Menu
On the color selection menu for the colors for the position & magnification
correction and the rotation correction and on the mask edition menu for the
mask edition, some set values are changeable.
Switch to an intended function by pressing
value by pressing
The changeable set values are as follows.
Function name
LCD display
Range of color
COLOR
Darkness
correction ratio*
1
DARK CMP
Shutter time*
1
SHUTTER
*1:Not included in the set items on the mask edition menu.
58
Ramco Innovations
or
.
Setting range
(Initial value)
Sets the range of the color (margin against the
0 – 25
color selected by teaching). As the set value
(0)
increases, wider range of colors is covered.
Sets the ratio to correct the darkness of colors.No
correction is made with "0", and maximum
correction is made with "31" (amplifying black
0 – 25
and converting it to other color).As the set
(27)
value increases, dark color tends to be a noise
element; while as the set value decreases, sensor
is affected by disturbance light more.
Sets the shutter time.Set value×100 µs will
0 – 263
be the actual shutter time.The shutter time
(100)
exceeding the image transfer time cannot be set.
www.optex-ramco.com
and
and change a set
Explanation
phone 800-280-6933
Advertisement
Table of Contents
