Set Items List - Optex CVS2 Instruction Manual

Set Items List

The following table shows the functions, the setting range, and the initial
values of the set items whose settings are changeable.
Function name
LCD display
Sensitivity of lack
for identit*
1
CMP LACK
Threshold value
of identity*
1
CMPLEVEL
Color sensitivity
for identity*
1
CMPSENSE
Range of detection
color for position
correction*
1
COLOR% P
Range of detection
color for rotation
correction*
1
COLOR% R
Darkness
correction
factor*
1 ★
DARK CMP
*1:Set value changes when the bank is switched.
★:Patent is pending.
52
Ramco Innovations
Setting range
(Initial value)
0 : Average identity of the pixels not being
0 – 15
1 – 15 : Set to one of these values for the
(0)
Sets the level of the identity to turn ON the
output. As the set value increases, higher
0 – 100
identity is required. Since negative value is also
processed internally, output may not turn ON
(70)
even when "0" is displayed for the identity if "0"
is set as the set value.
Sets the level to permit the difference in color
0 – 15
against the registered pattern."0" brings the
highest sensitivity and slight difference in color
(10)
can be distinguished.
Sets the range of the color for the position
0 – 25
correction (margin against the color selected by
teaching). As the set value increases, wider range
(1)
of colors is covered.
Sets the range of the color for the rotation
0 – 25
correction (margin against the color selected by
teaching). As the set value increases, a wider
(1)
range of colors is covered.
Sets the ratio to correct the darkness of colors.No
correction is made with "0", and maximum
correction is made with "31" (amplifying black
0 – 31
and converting it to other color).As the set
(27)
value increases, dark color tends to be a noise
element; while as the set value decreases, sensor
is affected by disturbance light more.
www.optex-ramco.com
Explanation
masked will be the identity.
inspection of smear or lack. As the value
increases, the sensitivity to the number of
pixels of different color will be higher.
phone 800-280-6933