Precautions For Safe Use - Optex CVS2 Instruction Manual

PRECAUTIONS FOR SAFE USE

• Do not disassemble nor modify the device.
Otherwise, it may cause a fire or an electric shock.
• Continuing to use the device under abnormal
conditions, such as those with abnormal smell or
smoke, may cause a fire or an electric shock. In
such cases, immediately pull out the power plug and
confirm that the abnormal condition is removed, and
then contact us or our sales representative. Never
repair the device by yourself since it is dangerous.
• Do not use the device by a power voltage outside
12-24 V DC. It may cause a fire or an electric shock.
• Avoid wiring a cable and high-voltage or power cable
in parallel or wiring them in a same piping. It may
cause a malfunction of the device.
• Do not mount the device at any one of the following
places to use this product properly and safely. If not
observed, it may cause a fire, an electric shock, or a
failure.
• Do not handle electric cables as follows. Otherwise,
cables may be damaged, resulting in a fire or an
electric shock.
• Do not touch the device or its cable with wet hand.
Otherwise, it may cause an electric shock.
Ramco Innovations
• Place at high prospective humidity
• Place at high prospective temperature (where
the device is subject to direct sunshine)
• Dusty place
• Place with insufficient ventilation
• Place where static electricity is likely to be
generated
• Place involving corrosive or flammable gases
• Place where the device is subject to water, oil,
and /or chemical splashes
• Place with direct vibration and impact
• Damage • Torture
• Twist • Bundle,
www.optex-ramco.com
• Pull
• Put heavy stuff
phone 800-280-6933
3