Details Of Lcd Screen - Optex CVS2 Instruction Manual

Details of LCD Screen

This section describes the details of the contents displayed on the LCD
screen.
①
②
③
④
④
Identity bar graph
D isplays identity in a bar graph. The boundary between green and orange is
the threshold value of identity. (The threshold value can be changed by the
CMPLEVEL set value).
⑤
Bank number
Displays the present bank number. (0-14)
⑥
Auxiliary output status
Displays ON/OFF condition of an auxiliary output signal. Output is ON when
is displayed.
⑦
Response time (Unit: 0.1 ms)
Displays the time from the beginning of imaging till the output of the judgment
signal by the unit of 0.1 ms.
⑧
Identity and output signal condition
Displays the identity (0 -100) by a numeral.
A numeral displayed in orange shows that output is ON, while a numeral in green
shows that output is OFF.
The screen to make setting and edition differs depending on
each function. Refer to the explanations of each function for
details.
14
Ramco Innovations
①
Image screen
D isplays the image taken by the built-in
camera.
②
Main menu
D isplays the menu for setting or edition.
③
Screen display mode
Shows the display status when the display
⑤
mode is switched with
⑥
See "Confirming Identity by Switching
⑦
Screen Display Mode" on Page 19.
⑧
www.optex-ramco.com
button.
phone 800-280-6933
●