Table of Contents
Advertisement
5
In order to confirm the movement
of the position correction, display
by pressing
TRNS
times.
A work in orange is displayed with its position
corrected to the center (registered position).
6
Press
for 3 seconds or
more.
The set value change screen is displayed
and the set value is displayed in red.
7
Decrease the set value by pressing
. (POSIT%X=5)
The work in orange returns to the right since
the maximum value for the horizontal position
correction is limited to 5 (pixels).
8
Press
for 3 seconds or more.
The set value is entered and the set value
reference screen is restored.
Pressing
reference screen, canceling the revision
to the set value.
9
Press
.
The standard screen is restored.
Ramco Innovations
several
will restore the set value
www.optex-ramco.com
CHANGING SET VALUE
phone 800-280-6933
5
51
Advertisement
Table of Contents
